Sunday, September 3, 2017

On The Table - Daemon Prince of Khorne

Putting the final touches on the converted Daemon Prince of Khorne. The body is basically done and clear coated. I am mostly satisfied with it. I wish the purple base had shown through more but the red highlights turned out ok.

Super happy with how the ax swap turned out. I was worried that it would be oversized and it is. But I like the overt Khorniness that it adds to the mini. The Khorne symbold that I put on the knees, forearms and shoulder were ok but are lost somehow in the model. A giant ax with half of Khorne symbol on it is somewhat less subtle.

The top photo is to demonstrate what difference a little effort makes. I see so many people do a base coat, wash and call it good. A little hard hedge highlighting (or for Emperor-sake, drybrushing) goes a long way to add depth to a mini. The bottom left is just based and washed and the top right is a little broke-edge highlighting. A world of difference.

It doesn't take much time, effort or skill to create depth in a mini which leaves me confused as to why so many people walk away from minis that are barely started with no effort put in. What is worse is that it is painfully evident to anyone with skill that they are phoned in. I feel the same about half-ass air brushing.

Sunday, August 27, 2017

Touch Up - White Marking

Did some thinking and experimenting on the Ultramarines white markings and I came up with this.

Base Celestra Grey, wide highlight of Ulthuan Grey then White Scar on the edges. It helps dampen down the starkness of the white over the darker blue while still keeping it bright.

It also adds some depth to the white markings that the white on white lacked.

I don't know what I am going to do when it comes to doing the helmets of the veterans or the laurels, but I'll cross that bridge when I come to it. 

Wednesday, August 23, 2017

Finished - Ultramarine Test Marines

I wish I had titled these "finished" posts with the tag "stick a fork in" instead. Regardless these little blue devils are finished.

I started by spray painting the minis with Krylon "satin oxford blue" which is the closest that I could find to Kantor Blue and still not be gloss. I like matte or satin primer as the next layer tends to stick better. Because the primer and base were so close, I didn't waste much time in getting a good foundation.

To get a good base, I did an overbush of Ultramarines Blue or Altdorf Guard Blue as it is known now. I didn't make efforts to cover the recesses or cover up too much detail. Once the base color is down then it is time for the secondary colors. I paint black all the areas that I want black or silver straight black. The silver areas get a dose of Ironbreaker and the black areas are painted my new favorite color Eshin Grey before getting a heavy drybrush of Dawnstone. Both areas get washed black.

I used to use a 1:1 mix of Abbadon Black and Dawnstone as my base color for black with good success. I discovered that Eshin Grey is almost an exact match. I would rather have per-mixed paints for consistency. Also, if I was making a new batch, it took two pots of paint to make one batch of mix and it rarely lasted until gone as mixed and diluted paints tend to gum up on me.

Thursday, August 17, 2017

On The Table - Blood Bowl Nuns 3 of 16

Working on Blood Bowl Nuns for JHaygood on Vyndica and I am learning some things about myself as a commission painter. I have taken on too many projects at this point and I am not managing my time well. Painting time is down in general and I am not doing a good job prioritizing commission work over my own work.

I am also getting bored with big projects. The Char's Zaku project is grinding on and I am stalling out on it. I can tell that the client is getting frustrated with the slow progress so I need to finish it quicker to keep him happy.

I am also struggling with communication with a few clients. Part of that is that I have not made some things explicit in my painter profile and also that I am not great at communication personally.

Despite all these challenges, I am really enjoying commission painting. It is challenging me and getting me to do some things that I would not normally be doing. 

On The Table - New Rollers

Got a little tired of paying $2-3 a piece for nice bases. I had seen Green Stuff World's rollers for making textured bases. They were a little pricey at $15 before shipping but if I can make 10 bases with one it has paid for itself.

So I bought two.

I got the Factory and the Diamond Plate ones. I really wanted the Dark Ruins ones for when I start on the CSM and Deathguard armies. I should have also gotten the smooth flat one too to roll out the bases.

In terms of using them, they are decent. So far my first 5 bases have turned out of but not stellar. It is hard to get the green stuff smooth and even across the base for starters. The instructions say to use a lubricant or powder or nothing to keep GS from sticking to the roller. Pro top: that last one is not very helpful. GS got all up in the diamond plate roller on the first try. Now they are soaking in WD40.

So far I like them. It is going to take some time to get good at it, but hopefully this will let me bast whole armies for little money. 

Sunday, July 23, 2017

On The Table - Ultramarines Test Minis.

 At this point I'm going almost a month between poets and that's not really acceptable. My main excuse is that the weather is nice in my lovely wife has motivation to do  work on the exterior  of our home. This is cutting into not only my painting time in but also all of my free time. This means that when I do sit down at my paining table are usually don't have the motivation to paint as furiously as I normally do.

 I still have the Char's Zaku  Commission that is about 1/3 finished, the dark Eldard commission that is about 80% finished and the blood bowl nuns that I only started the test model for.  On the back burner is a commission for some Alpha Legion terminators that the deposit hasn't even been paid. All of this on top of my own work and I'm trying to finish.  There's the deathwatch army to flush out for eighth edition,  there's the demon prince of khorne that is about halfway done,  A librarian on a bike that I paid him for a friend, and now these Ultramarines.

 I don't know if I've mentioned that on this blog but my next army and my fourth power armor army will be Ultramarines.  Before ruining any of the Primaris Marines,  i'm going to work out all the kinks of my painting style on some dark vengeance dark angels that have been rehabbed into loyalist Marines.  I did this by removing all of the raised iconography on the left shoulder pads with a Dremel    After that they were basically generic Marines. I found an awesome blue spray paint  to work as a primer and with a little bit of reading and a few mistakes I think I have a good paint scheme for my Ultra Marines.  I'm not gonna set it down in stone yet because I think there's are still some bugs to work out. 

Friday, July 14, 2017

Vyndica - Char's Zaku

Every time I start a new portion of the external armor, I think to myself, "Why am I painting the inside of of these armor plates. Then I remember that I am a professional and cutting corners is not my bag, baby.

Even through more than a few of these removable are less than removable, I am still going to paint every surface of this mini. Even though this mini is is not precisely meant to be painted in this manner, I will press on. It is the same reason that I paint my chest plates on Space Marines even though no one will ever see it. I'll know and so will my clients.

The right arm (ironically on the left in the image), has all the internal surfaces painted but not all are removable safety though. The assembly on the left arm (on the right, duh) went faster and I am hoping that I can make more of the armor plates removable.

Next step are those legs. I know how to use them.